Skip to main content
9182 5233
Coolbest Aircon logo
🛠️

Aircon Installation Singapore — HDB, Condo & Landed

From a single-split replacement to a four-fan-coil multi-split for a 5-room HDB BTO, Coolbest handles the full installation: load sizing, brand recommendation, BCA-compliant external brackets, copper trunking, condensate routing, vacuum and pressure test, and first-run verification.

From S$800 / system, quoted per job
New split-type Daikin aircon installation on an HDB external wall with a BCA-approved bracket and protective cover

From a single-split replacement to a four-fan-coil multi-split for a 5-room HDB BTO, Coolbest handles the full installation: load sizing, brand recommendation, BCA-compliant external brackets, copper trunking, condensate routing, vacuum and pressure test, and first-run verification.

What goes into a proper aircon installation

A bad aircon install causes problems for years. A vacuum step skipped today shows up as a failed compressor in three years. A copper joint flared incorrectly leaks refrigerant slowly until the system gives up.

A proper installation has six non-negotiable steps:

  1. Load sizing — matching BTU to room size and direction of sun
  2. BCA-compliant bracket mounting — external brackets that meet Singapore building rules
  3. Copper trunking — concealed where possible, protected against UV
  4. Condensate routing — sloped 1° downward to a drain or condensate pump
  5. Vacuum + pressure test — pulling moisture out before refrigerant is charged
  6. First-run verification — measuring supply temperature with a probe

We don’t skip any of these. The vacuum step alone takes 30+ minutes per system; some “budget” installers skip it to fit more jobs in a day.

HDB-specific considerations

For HDB installations, the external bracket needs to comply with BCA Singapore guidelines. The bracket size, the wall anchors, and the corrosion treatment matter — Singapore’s coastal humidity will eat a non-galvanised bracket in 2–3 years.

We also handle the town council notification on your behalf. The notification is straightforward but easy to forget; without it, the installation can be challenged later by the town council.

Brand recommendations for Singapore homes

For most Singapore HDB and condo bedrooms, our shortlist is:

  • Daikin iSmile — quietest at low fan speed, great for bedrooms
  • Mitsubishi Starmex — best long-term reliability for the price
  • Panasonic X-Deluxe — strongest dehumidification (good for west-facing rooms)
  • Toshiba Hi-Wall — best value entry point
  • LG DualCool — newest inverter tech, fast cooling

We carry no brand quotas. The recommendation depends on your room, your usage hours, and your warranty preference.

What's Included

  • Free on-site consultation and load sizing
  • BCA-compliant external bracket installation
  • Concealed copper trunking where access allows
  • Vacuum and pressure test before first run
  • First-run verification at supply outlet
  • 1-year installation warranty + manufacturer parts warranty
  • Old unit removal and recycling included

How We Do It

1

Free Site Visit

We measure rooms, check wall access, and confirm the BTU load needed. Quote in writing within 24 hours.

2

Brand & Model Selection

Daikin, Mitsubishi, Panasonic, Toshiba, LG — we recommend based on the room, your usage, and the warranty terms.

3

Pre-Install Prep

BCA bracket ordered. HDB or condo notifications coordinated. Slot booked for the morning to allow a full day.

4

Installation Day

Bracket mounted, copper trunked, condensate routed, vacuum and pressure test completed before any refrigerant is charged.

5

First-Run & Sign Off

Cold-air verification, remote pairing, and a walkthrough of the warranty card.

PRICING

Pricing Options

Single Split
From S$800
1 indoor + 1 outdoor
  • 9,000–18,000 BTU indoor unit
  • Up to 4m copper trunking included
  • BCA bracket and condensate piping
  • Removal of old unit included
Most Popular
Multi-Split
Quoted
2–4 fan coils
  • Single outdoor condenser, multiple indoors
  • Sized for 3-room to 5-room HDB / condo
  • Up to 8m copper trunking included
  • Most popular for whole-home cooling
Replacement Only
From S$350
per fan coil
  • Reuse existing copper and bracket where safe
  • Pressure test of existing pipework
  • Refrigerant charge and first-run check
  • Best when copper is under 5 years old

Why Coolbest For This Job

BCA-Compliant Every Time

External brackets meet BCA Singapore standards. We never bypass the bracket rules to save cost.

Brand-Agnostic Recommendations

We carry no brand quotas. The recommendation is based on your room, usage, and warranty — not commission.

Vacuum & Pressure Test, Always

Skipping the vacuum is a common shortcut that causes refrigerant contamination and early compressor failure. We never skip it.

In The Field

BCA-compliant external aircon bracket installed on an HDB wall
BCA-compliant brackets for every HDB external installation
Concealed copper pipe trunking for a multi-split installation
Concealed copper trunking — clean, safe, condo-friendly
★ ★ ★ ★ ★

What Singapore Homeowners Say

Real reviews from Jurong West, Clementi, Bukit Batok, and beyond.

★★★★★
"Needed a multi-split installed for a new BTO handover. Team handled the HDB approvals and brackets, vacuumed the pipes properly, and tidied up. Fair price, zero drama."
Shawn T.
Boon Lay
★★★★★
"Replaced four old fan coils with new Mitsubishi Starmex over two days. Clean job, copper trunking is invisible, and the cold air is night and day better."
Anna K.
Pandan Valley Condo

Ready for Aircon Installation?

WhatsApp +65 9182 5233 — most West Region addresses see a technician within 90 minutes.

Aircon Installation FAQ

Can you install aircon in HDB flats? +
Yes — we handle HDB aircon installation including BCA-approved external brackets and the required town council notifications. We've installed across HDB blocks of every era from the 1980s to the latest BTOs.
Which brands do you recommend for HDB flats? +
Daikin iSmile, Mitsubishi Starmex, and Panasonic X-Deluxe are our most reliable picks for 3-room to 5-room flats. For tight budgets, the entry-level Daikin Smile range is a solid pick.
How long does an installation take? +
A single-split usually takes 4–6 hours. A 4-fan-coil multi-split for a 5-room flat takes a full day, sometimes two if the copper trunking runs are long.
Do I need approval from HDB before installation? +
For new installations on the external wall, yes — a town council notification is required. We help coordinate the paperwork.
What about condos? +
Most condos require management approval and access coordination through security. We handle the communication; you just need to confirm the slot with management 48 hours ahead.
What's the warranty? +
1-year installation workmanship warranty from Coolbest, plus the manufacturer's parts warranty (typically 5 years for compressors, 1 year for full unit).